lower the ride height 

mg online mailing list

It is possible to lower the ride height of robber-bumper but the work involved is fairly considerable. For instance,
crossmember shown here on the right has a raised chassis mounting point wMch raises the height at the front end.
This has tobe replaced a complete crossmember from an earlier car, such as that shown on the left. known achieve
front the Some effect owners have been springs to of lowering the the suspension alters geometry travel and reduces suspension
— not recommended. The front suspension bushes themselves can be directly replaced by the far beefier but rather more expensive V8 bushes
which are much longer lasting and less prone to "clonking"                                                                               


A GT anti-roll bar is thicker than that of the Roadster while a still thicker bar s also available.

The Illawarra            Gas turbine             ROVER SD1                     SS ORONTES                      F100                     MONARO GTS 350       

Monaro & GMH & GMC CARS forum
monaro & GMC & gmh CARS, This group has been set up to provide a platform for anyone interested in monaro & GM CARS, to post comments or questions regarding anything to do with this subjectPlease ...
http://groups.msn.com/MonaroGMHGMCCARSforum/home.htm

     MGB                   SD1     

Caution & Disclaimer

This is a private page with no commercial interests whatsoever. The author is in no way affiliated with any named marque and company. 
All items and articles contained in this website have been
published in good faith and neither the website owner or
his webmaster can accept any legal responsibility for the
accuracy of any information or statements contained herein.
I (r g & m a hopley) the author and editor of this website hereby disclaim 
responsibility for all and any legal and or technical liability
whatsoever (as may by law be disclaimed) and as might
otherwise arise.